Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Forgot Passwor On SSM-10

Dear Sir,

Now i have problem,I forgot the password on SSM-10 (ASA5510).

How to resetpassword on SSM-10 Module?

Best Regards,

3 REPLIES
Silver

Re: Forgot Passwor On SSM-10

If your ASA is running on 7.2(2) code, then its pretty simple. It can be done using a single command:

hw-module module password-reset

http://www.cisco.com/univercd/cc/td/doc/product/multisec/asa_sw/v_7_2/rel_note/asarn722.htm#wp128580

However, if you are on a version older than 7.2(2), then we need to reimage the SSM module to recover the password. Here is a link which explains the procedure:

http://www.cisco.com/en/US/products/ps6120/products_configuration_guide_chapter09186a00805521b6.html#wp1049302

Regards,

Vibhor.

New Member

Re: Forgot Passwor On SSM-10

Dear Vibhor,

It's great to see your email.Thank you for your support.My ASA version 7.1(2).By the way Can i ask you one more question? I want recovery ssm than i type command:

+hostname# hw-module module 1 recover configure.

+URL [tftp://171.69.1.129/dqu/sg-6.0-1345-tftp.img](I don't understand tish line : dqu/sg-6.0-1345-tftp.img, and How can i get img file?

I'm waiting your email as soon as.

Best Regards,

Silver

Re: Forgot Passwor On SSM-10

Ok .. I'm assuming that you need explanation about following string:

Image URL [tftp://1.1.1.1/IPS-SSM-K9-sys-1.1-a-5.0-0.15-S91-0.15.img]

"IPS-SSM-K9-sys-1.1-a-5.0-0.15-S91-0.15.img" this is a system image file which can be downloaded from following link:

http://www.cisco.com/cgi-bin/tablebuild.pl/ips5-asa-aip

(A valid CCO ID with software level access is required)

For this procedure, you essentially need a system image file. A normal signature update file will not work.

Regards,

Vibhor.

280
Views
0
Helpful
3
Replies
CreatePlease login to create content