Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

FTP stopped working once upgrade FWSM from 1.x to 4.0

Hi,

Admins are no longer able to initiate FTP from the Inside network to the same servers at the Outside network, once upgraded FWSM from 1.x to 4.0.x.

FTP inspection in the policy map is there, as you know it is the default config.

Appreciate your expertise, where could be the problem. Definite, the last thing I would do is taking your advise to roll back

Thanks

Sam

2 REPLIES
Cisco Employee

Re: FTP stopped working once upgrade FWSM from 1.x to 4.0

By no means should you downgrade to 1.x.

FWSM 4.0 had no major issues with FTP.

I would suggest collecting "debug ftp" logs and captures on the FWSM in and out interfaces to track it down further. Also syslogs could give some insight.

PK

New Member

Re: FTP stopped working once upgrade FWSM from 1.x to 4.0

Thanks PK. I did found the problem and fixed it, yesterday but forgot to update my posting. The problem was in class-map configuration, there was match statement.

Appreciate your try to help.

Sami

164
Views
0
Helpful
2
Replies
CreatePlease login to create content