08-17-2007 04:15 AM - edited 03-11-2019 03:59 AM
I am wanting to swap a 2600 out with a 2800.
We do application hosting here and one client is behind the said 2600. They do FTP transactions and a few months back when they started this process we fixed the issue by adding the following commands onto the 2600
ip inspect name Ethernet_0_0 ftp
and then
intf 0/0
ip inspect Ethernet_0_0 in
Intf 1/0
ip inspect Ethernet_0_0 in
I copied the config to the 2800 and made adjustments were the intfa names changed and all works great with the exception of FTP. 2600 is back in place until I can get 2800 working.
Cheers,
Brent Austin
08-17-2007 05:22 AM
Did you check that 2800 IOS has the same features as the IOS in the 2600?
08-17-2007 10:47 AM
Yes, was done to make it as seamless as possible for all clients...
Unfortunately, it does not do the trick.
Is there a way to just allow ftp to and from that is easier than the one used?
Brent
08-17-2007 11:46 AM
Could you post the 2800 sh ver output and config?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide