Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

FW Module BIOS

Is there a way via the CLI to determine the BIOS and software version of a FW module in a 6500?

1 REPLY
Hall of Fame Super Blue

Re: FW Module BIOS

Hi

Not sure what you mean exactly by BIOS but on the 6500 run the following command

"sh module"

Output from one of your 6500's. Note FWSM is in slot 7

=============================================

SZ-JFH-F00-DTE1#sh mod

Mod Ports Card Type Model Serial No.

--- ----- -------------------------------------- ------------------ -----------

3 16 SFM-capable 16 port 1000mb GBIC WS-X6516-GBIC SAL0728G7ZE

5 2 Supervisor Engine 720 (Active) WS-SUP720-BASE SAD083703U6

6 4 CSM with SSL WS-X6066-SLB-S-K9 SAD083100RY

7 6 Firewall Module WS-SVC-FWM-1 SAD085008T7

8 48 SFM-capable 48 port 10/100/1000mb RJ45 WS-X6548-GE-TX SAD073803J8

9 1 Application Control Engine Module ACE10-6500-K9 SAD11300050

Mod MAC addresses Hw Fw Sw Status

--- ---------------------------------- ------ ------------ ------------ -------

3 000d.29fe.5f70 to 000d.29fe.5f7f 5.5 6.3(1) 8.5(0.46)RFW Ok

5 0011.21a1.2cfc to 0011.21a1.2cff 3.1 8.1(3) 12.2(18)SXF6 Ok

6 0012.0060.5d50 to 0012.0060.5d57 1.1 2.1(4) Ok

7 0003.3235.a340 to 0003.3235.a347 3.0 7.2(1) 2.3(2) Ok

8 000d.65ea.1310 to 000d.65ea.133f 5.0 7.2(1) 8.5(0.46)RFW Ok

9 001c.5843.f0fc to 001c.5843.f103 1.6 8.6(0.252-En 3.0(0)A1(3b) Ok

Mod Sub-Module Model Serial Hw Status

---- --------------------------- ------------------ ----------- ------- -------

=============================================

so for example our FWSM software version is 2.3(2)

HTH

Jon

108
Views
0
Helpful
1
Replies