Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

FWSM.2.3 (Packet-Tracer)

Hi All,

I've been trying to figure the syntax for a "packet-tracer" like command for FWSM 2.3. Does the IOS support this command?

If not, does anyone know an alternative to test ACL/NAT rules in FWSM 2.3 without actually sending a real traffic thru it?

Thanks in Advance.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: FWSM.2.3 (Packet-Tracer)

Packet Tracer is not available to FWSM codes at the moment.

There is no simulation type commands that you can use with the FWSM code at the moment. You wqill have to test with real traffic, and check logs or do packet captures, to check for results.

Regards,

1 REPLY
Cisco Employee

Re: FWSM.2.3 (Packet-Tracer)

Packet Tracer is not available to FWSM codes at the moment.

There is no simulation type commands that you can use with the FWSM code at the moment. You wqill have to test with real traffic, and check logs or do packet captures, to check for results.

Regards,

2652
Views
0
Helpful
1
Replies