Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Silver

FWSM 3.1 Set TCP Idle timeout - ISSUES!

HI,

I need to set the tcp idle timeout for a specific tcp stream to 0, due to issues with legacy server.

I have implemented a class-map to match the access-list, which in turn matches the flow, I have then put this into the global_policy policy-map and set the connection tcp 0.

However it doesnt seem to be working, as tcp sessions for the flow are still idleing out.

Do you need to remove the policy map from the global interface and then re-apply for it to take effect???

Class-map TCP

Match access-group TCP

policy-map global_policy

class-map TCP

set connection timeout 0

class inspection_default

Any advice most welcome!

Thanks

LR

1 REPLY
Silver

Re: FWSM 3.1 Set TCP Idle timeout - ISSUES!

261
Views
0
Helpful
1
Replies