Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

FWSM Active-active

can i configure FWSM active-active failover in VSS 1440

4 REPLIES
Cisco Employee

Re: FWSM Active-active

Pradeep,

As of today, there is no IOS that will support FWSM with VSS. Having said that, you may need to wait for a IOS release that supports FWSM with VSS and then look at the configuration guidelines and limitations.

Regards,

Arul

*Pls rate if it helps*

New Member

Re: FWSM Active-active

We have a case (vss+fwsm+vrf) , We are testing . Ios is a big problem, because we are using cisco inside version, It has many problems,The key to problem is that FWSM's failover link can't pass through VSL (VSS),If you have two 6509 and two FWSM in each box.

Cisco Employee

Re: FWSM Active-active

Pradeep,

FYI.. 12.2(33)SXI for the Catalyst 6500 has been posted on CCO and this version of software does support FWSM with VSS.

Release Notes for the Catalyst 6500 Series and Cisco 7600 Series Firewall Services Module, 4.0(x)

http://www.cisco.com/en/US/docs/security/fwsm/fwsm40/release/notes/fwsmrn40.html

Regards,

Arul

*Pls rate if it helps*

Cisco Employee

Re: FWSM Active-active

Pradeep,

FYI.. 12.2(33)SXI for the Catalyst 6500 has been posted on CCO and this version of software does support FWSM with VSS.

Release Notes for the Catalyst 6500 Series and Cisco 7600 Series Firewall Services Module, 4.0(x)

http://www.cisco.com/en/US/docs/security/fwsm/fwsm40/release/notes/fwsmrn40.html

Regards,

Arul

*Pls rate if it helps*

426
Views
0
Helpful
4
Replies
CreatePlease to create content