Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

FWSM Failover on VSS environment

Hi,

Is FWSM Failover feature supported on a VSS environment? We currenlty have two 6509 with FWSM on both switches. VSS is currently enabled and I would also want to enable the failover on the FWSM. The current IOS running is s72033-adventerprisek9_wan-vz.122-33.SXI. Thanks

7 REPLIES
Cisco Employee

Re: FWSM Failover on VSS environment

Yes, FWSM works together with VSS as of FWSM release 4.0.4 (I'd suggest going for latest in 4.0 train).

edited: version numbers as per:

http://www.cisco.com/en/US/prod/collateral/modules/ps2706/product_bulletin_c25-478751.html

New Member

Re: FWSM Failover on VSS environment

Thanks for your reply. How about the configuration? Will it be transparent? I can't find any configuration guide on FWSM failover on a VSS environment. Hope you can help. Thanks

Cisco Employee

Re: FWSM Failover on VSS environment

Well the FWSM (from config point of view) is not aware whether the setup is VSS, same way it's not aware if the blades in failover are in same or different chassis.

Cisco Employee

Re: FWSM Failover on VSS environment

My bad!

Sorry for that 4.0.4 is the release supporting VSS. Sorry for this blunder.

http://www.cisco.com/en/US/prod/collateral/modules/ps2706/product_bulletin_c25-478751.html

New Member

Re: FWSM Failover on VSS environment

Hi,

So after I upgrade my FWSM to 4.0.4. I will just use the same configuration like the one below?

hostname(config)# failover lan unit primary

hostname(config)# failover lan interface if_name vlan vlan

hostname(config)# failover interface ip if_name ip_addr mask standby ip_addr

For the VLAN, Will it be the same as the VLAN used by VSS?

Cisco Employee

Re: FWSM Failover on VSS environment

Well, normally you should split data vlans from failover vlan (requirement) and stateful link vlan (suggested). It's best practice.

I would not recommend mixing VSL and failover vlans - I'm not sure if any parser would complain though.

New Member

Re: FWSM Failover on VSS environment

Thanks! Will test the configuration. And will let you know if I have more inquiries.

1062
Views
0
Helpful
7
Replies
CreatePlease to create content