Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

FWSM hangs after copying config file to startup-config

FWSM hangs after copying config file to startup-config and reloading.

Running V4.0(4).

We do a "write erase", copy config file from tftp server into startup.

After a reload, the FWSM locks up. We cannot session into it or communicate via its inside interface.

Using a cable connected to the console port shows FWSM booting and processing statements from startup memory. Afterwards, running-config looks good (from console).

However we still can't session into it or communicate via Vlan interfaces.

If the same config file is copied from tftp into running, everything is OK.

Session works and FWSM will communicate via Vlan interfaces.

  • Firewalling
141
Views
0
Helpful
0
Replies
This widget could not be displayed.