10-01-2007 12:12 AM - edited 03-11-2019 04:18 AM
I'm reading the configuration guide, release 3.2.
I want to maximize the use of the contexts creating more bridge-group within the same context.
Can someone post a configuration example?
I want to understand well the interface naming and access-list.
Thanks.
Andrea
Solved! Go to Solution.
10-01-2007 05:08 AM
There's nothing magic about the interface name "inside" ... it's just a default. You don't need multiple "nameif inside" commands. Use names lik3 "nameif bvi1-inside" and "bvi1-outside", or something else that makes sense given what's on the subnet in question. You would then have differenet acl's for each interface.
10-01-2007 03:05 AM
Hello Andrea,
Can you explain briefly what you want to do ?
jF
10-01-2007 03:45 AM
I want to use a FWSM (but I don't have it now!) with contexts and transparent mode. I understand that I can create eight bridge-group into a single context, each with a couple of interfaces, but is not clear how I can declare more than one inside (may be inside1, inside2,..or isolated so I can have more "nameif inside" each for bvi) or outside interfaces, and than how can I use acl.
I believe these are very simple questions but I'm not able to find documentation or example.
Many thanks for your help.
Andrea.
10-01-2007 05:08 AM
There's nothing magic about the interface name "inside" ... it's just a default. You don't need multiple "nameif inside" commands. Use names lik3 "nameif bvi1-inside" and "bvi1-outside", or something else that makes sense given what's on the subnet in question. You would then have differenet acl's for each interface.
10-01-2007 06:03 AM
Simple!
Many thanks for your help.
Andrea.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide