The network has about 10 VLAN's with HSRP configured for each VLAN on the redundant 6509 switches. Each switch has a FWSM. Now traffic for each VLAN should pass through the Firewall. Need to configure the FWSM in Active/Active mode with 5 VLAN's in the one context and the other 5 VLAN's in the other context.Also FWSM needs to be configured in Transparent mode.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...