Got a FWSM with multiple context in transparent mode and the admin context in routed mode. The admin context does not pass trafic.
Only one context in transparent mode is using NAT. When I put the admin context in router mode, the nated connection start loosing packet and disconnecting tcp session. When I put the admin in transparent mode, problem goes away.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...