Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

FWSM or ASA Configured for VRF

I know that I firewall can pass VRF routed traffic, but can you actually configure a VRF instance on a ASA or FWSM?

thank you,

Kevin

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

Re: FWSM or ASA Configured for VRF

Kevin,

I think running FWSM/ASA with multiple context is same as having multiple VRFs in router. As using context you can get same functionality as vrf such as separate routing table, ACLs on the per context basis. So each context will act as separate standalone firewall.

3 REPLIES
Bronze

Re: FWSM or ASA Configured for VRF

Kevin,

I think running FWSM/ASA with multiple context is same as having multiple VRFs in router. As using context you can get same functionality as vrf such as separate routing table, ACLs on the per context basis. So each context will act as separate standalone firewall.

New Member

Re: FWSM or ASA Configured for VRF

yagnesh, got it, that makes sense.

very good, thank you

Gold

Re: FWSM or ASA Configured for VRF

last time i checked you can't run dynamic routing protocols in multiple context mode.

http://www.cisco.com/en/US/docs/security/asa/asa80/configuration/guide/contexts.html#wp1116132

366
Views
5
Helpful
3
Replies