I have a FWSM with OSPF with two neighbors all in area 1, it learn inter area and external routes from one of him, my problem is that the FWSM not flood this routes to other neighbor. I make a show ospf and i see the fwsm as ASBR and i dont understand why.
I paste the output from sh run router, show ospf and show ospf neighbor commands
FWSM-USERS# sh run router ! router ospf 1 network 10.2.89.0 255.255.255.0 area 1 network 10.2.244.0 255.255.252.0 area 1 network 10.2.252.16 255.255.255.248 area 1 network 10.2.252.40 255.255.255.248 area 1 router-id 10.2.252.42 log-adj-changes !
FWSM-USERS# sh ospf neighbor Neighbor ID Pri State Dead Time Address Interface 10.2.252.17 1 FULL/BDR 0:00:38 10.2.252.17 svi 10.2.252.41 1 FULL/DR 0:00:30 10.2.252.41 svi_vrf
FWSM-USERS# sh ospf
Routing Process "ospf 1" with ID 10.2.252.42 and Domain ID 0.0.0.1 Supports only single TOS(TOS0) routes Does not support opaque LSA It is an autonomous system boundary router Redistributing External Routes from, SPF schedule delay 5 secs, Hold time between two SPFs 10 secs Minimum LSA interval 5 secs. Minimum LSA arrival 1 secs Number of external LSA 7. Checksum Sum 0x 48992 Number of opaque AS LSA 0. Checksum Sum 0x 0 Number of DCbitless external and opaque AS LSA 1 Number of DoNotAge external and opaque AS LSA 0 Number of areas in this router is 1. 1 normal 0 stub 0 nssa External flood list length 0 Area 1 Number of interfaces in this area is 6 Area has no authentication SPF algorithm executed 79 times Area ranges are Number of LSA 68. Checksum Sum 0x2218b0 Number of opaque link LSA 0. Checksum Sum 0x 0 Number of DCbitless LSA 1 Number of indication LSA 1 Number of DoNotAge LSA 0 Flood list length 0
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...