02-04-2012 05:50 AM - edited 03-11-2019 03:23 PM
Hi All
I have had a strange issue with a pair of FWSM's in 2 6500's, it seems there was a failover but both module's have been reset.
CAT1
Feb 03 17:08:46.525: %SNMP-5-MODULETRAP: Module 8 [Down] Trap
Feb 03 17:08:46.522: SP: The PC in slot 8 is shutting down. Please wait ...
Feb 03 17:09:01.525: SP: shutdown_pc_process:No response from module 8
Feb 03 17:09:11.382: %C6KPWR-SP-4-DISABLED: power to module in slot 8 set off (Reset)
Feb 03 17:10:56.093: %DIAG-SP-6-RUN_MINIMUM: Module 8: Running Minimal Diagnostics...
Feb 03 17:10:59.796: %SVCLC-5-FWVTPMODE: VTP mode is set to non-transparent
Feb 03 17:11:00.068: %SNMP-5-MODULETRAP: Module 8 [Up] Trap
Feb 03 17:10:59.556: %DIAG-SP-6-DIAG_OK: Module 8: Passed Online Diagnostics
Feb 03 17:11:09.598: %OIR-SP-6-INSCARD: Card inserted in slot 8, interfaces are now online
Feb 03 17:15:27.269: %SNMP-5-MODULETRAP: Module 8 [Down] Trap
Feb 03 17:15:27.266: SP: The PC in slot 8 is shutting down. Please wait ...
Feb 03 17:15:42.266: SP: shutdown_pc_process:No response from module 8
Feb 03 17:15:52.277: %C6KPWR-SP-4-DISABLED: power to module in slot 8 set off (Reset)
Feb 03 17:17:36.670: %DIAG-SP-6-RUN_MINIMUM: Module 8: Running Minimal Diagnostics...
Feb 03 17:17:39.908: %SVCLC-5-FWVTPMODE: VTP mode is set to non-transparent
Feb 03 17:17:40.280: %SNMP-5-MODULETRAP: Module 8 [Up] Trap
Feb 03 17:17:39.312: %DIAG-SP-6-DIAG_OK: Module 8: Passed Online Diagnostics
Feb 03 17:17:49.678: %OIR-SP-6-INSCARD: Card inserted in slot 8, interfaces are now online
CAT2
Feb 03 17:10:26.028: %SNMP-5-MODULETRAP: Module 8 [Down] Trap
Feb 03 17:10:25.912: SP: The PC in slot 8 is shutting down. Please wait ...
Feb 03 17:10:41.040: SP: shutdown_pc_process:No response from module 8
Feb 03 17:10:51.048: %C6KPWR-SP-4-DISABLED: power to module in slot 8 set off (Reset)
Feb 03 17:12:36.082: %DIAG-SP-6-RUN_MINIMUM: Module 8: Running Minimal Diagnostics...
Feb 03 17:12:40.803: %SVCLC-5-FWVTPMODE: VTP mode is set to non-transparent
Feb 03 17:12:41.335: %SNMP-5-MODULETRAP: Module 8 [Up] Trap
Feb 03 17:12:40.398: %DIAG-SP-6-DIAG_OK: Module 8: Passed Online Diagnostics
Feb 03 17:12:50.818: %OIR-SP-6-INSCARD: Card inserted in slot 8,interfaces are now online
Does anyone know of any issues that would cause this issue, the software is 4.1(7) and no changes had been made for about 18 hours.
Regards MJ
02-04-2012 06:33 AM
Symptoms appear consistent with hitting a fatal bug of some sort.
Have you checked the filesystems of the units to see if a crashdump was generated? You'll probably need to open a TAC case to get to the bottom of it.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide