Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

FWSM -show local-host but no display

My company has a FWSM and running muti-context mode , but when I show local-host in one context , there is display nothing , just like blow

FWSM/N# show local-host
IPv4 local hosts:
IPv6 local hosts:
Interface inside202.118.2.0: 0 active, 0 maximum active, 0 denied
Interface inside192.168.1.0: 0 active, 0 maximum active, 0 denied
Interface inside202.118.6.0: 0 active, 0 maximum active, 0 denied
Interface inside59.44.43.192: 0 active, 0 maximum active, 0 denied
Interface toF5HA: 0 active, 0 maximum active, 0 denied
Interface inside210.83.25.64: 0 active, 0 maximum active, 0 denied
Interface inside218.25.39.32: 0 active, 0 maximum active, 0 denied
Interface toF5: 0 active, 0 maximum active, 0 denied
Interface inside202.107.117.0: 0 active, 0 maximum active, 0 denied
Interface outside: 0 active, 0 maximum active, 0 denied

and when i show in others context,there is OK ,how to solve it , is it a system bug ~~~~thank you ~~~

the information of FWSM

 

FWSM# show version

FWSM Firewall Version 4.1(9) <system>
Device Manager Version 6.2(2)F

Compiled on Fri 04-May-12 11:38 by fwsmbld

FWSM up 4 years 34 days
failover cluster up 4 years 34 days

Hardware: WS-SVC-FWM-1, 1024 MB RAM, CPU Pentium III 1000 MHz
Flash SMART CF @ 0xc321, 20MB

0: Int: GigabitEthernet0 : address is c464.13ec.2280, irq 5
1: Int: GigabitEthernet1 : address is c464.13ec.2280, irq 7
2: Int: EOBC0 : address is 0000.1300.0000, irq 11

Licensed features for this platform:
Maximum Interfaces : 1000
Inside Hosts : Unlimited
Failover : Active/Active
VPN-DES : Enabled
VPN-3DES-AES : Enabled
Cut-through Proxy : Enabled
Guards : Enabled
URL Filtering : Enabled
Security Contexts : 20
GTP/GPRS : Disabled
BGP Stub : Disabled
Service Acceleration : Disabled
VPN Peers : Unlimited 

FWSM/N# show version

FWSM Firewall Version 4.1(9) <context>
Device Manager Version 6.2(2)F

Compiled on Fri 04-May-12 11:38 by fwsmbld

FWSM up 4 years 34 days
failover cluster up 4 years 34 days

Hardware: WS-SVC-FWM-1

Licensed features for this user context:
Failover : Active/Active
VPN-DES : Enabled
VPN-3DES-AES : Enabled
GTP/GPRS : Disabled
BGP Stub : Disabled
Service Acceleration : Disabled

Configuration last modified by enable_15 at 16:51:16.320 BJT Fri Jan 13 2017

Everyone's tags (1)
15
Views
0
Helpful
0
Replies