Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

FWSM Ver 4.0(8) Riverbed Steelhead

Hi,

I am using Steelhead Mobile to accelerate to my corporate LAN and its not working. I have been told by Riverbed that its my firewall dropping packets with Option 76. i know you can use tcp-maps on the Pix and ASA to get around this, but how do i do it on an FWSM running Ver 4.0(8).

cheers

tony

1 REPLY
Cisco Employee

Re: FWSM Ver 4.0(8) Riverbed Steelhead

Unlike ASA, unfortunately FWSM does not have the tcp-map to allow specific option to pass through.

The closest command that FWSM has is to configure TCP State Bypass as follows:

http://www.cisco.com/en/US/docs/security/fwsm/fwsm32/configuration/guide/protct_f.html#wp1059772

That will allow TCP with Option 76 to pass through the FWSM.

688
Views
0
Helpful
1
Replies
CreatePlease to create content