Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

FWSM WARNING error

Dear All,

I am getting the below message on FWSM console when try to create the vlan interface.Should i do anything on switch console

FWSM(config)# inter vlan 30

FWSM(config-if)# nameif outside

WARNING: VLAN *30* is not configured.

INFO: Security level for "outside" set to 0 by default.

swami

3 REPLIES

Re: FWSM WARNING error

have you created vlan 30 in the switch engine and associated ports pertaining to that new vlan.. that warning message looks as it is leting you know that there is no vlan30 in switch to associate this interface with.

Silver

Re: FWSM WARNING error

One thing possible ... you have already assigned Outside interface into that switch or VTP domain.

Regards,

Dharmesh Purohit

Community Member

Re: FWSM WARNING error

did you do anything to fix this? I am getting the same error message, even after making sure the vlan is up and designated in the fw group.

552
Views
0
Helpful
3
Replies
CreatePlease to create content