Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

FWSM with two outside

Hi ,

I have FWSM with two outside interfaces , is there a way to configure two static route one primary to the first outside , and the other is backup ?

I have read this document , https://supportforums.cisco.com/docs/DOC-12015 It use the command " route-monitor" , but one outside with two gateways in the same subnet .

I tried the same command in my scenario , but I could not add two routes to the same destination pointing to two different gateways in two different subnet .

Also sLA monitor is not supported on FWSM , is there any solution for this scenario ?

Ali

Sent from Cisco Technical Support iPad App

3 REPLIES
Super Bronze

FWSM with two outside

No unfortunately that is not supported on FWSM.

And you are right, the route-monitor is only supported on the same outside interface, not 2 different outside interfaces.

New Member

FWSM with two outside

Thanks Jennifer ,

What about the new ASA Module , I heard that it supports SLA monitor ..

Ali

Super Bronze

FWSM with two outside

Yes, the new ASA-SM does support SLA monitor.

Here is the config guide for the ASA-SM for your reference:

http://www.cisco.com/en/US/docs/security/asa/asa84/configuration85/guide/route_static.html#wp1119813

384
Views
0
Helpful
3
Replies