Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

FWSM

how to nter in to MSFC, SUP, FW on 6513.

2 REPLIES

Re: FWSM

Hello aksher

from the 6500 chassis, you can use the session command to enter to the appropriate chassis...

session 4, where 4 is the module number... you need to have the correct modules on the correct slots !!!!

Hope this helps..all the best..

Raj

Re: FWSM

Refernce:

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/mod_icn/fwsm/fwsm_2_3/fwsm_cfg/sysmgmt.htm

Session into the FWSM using the command appropriate for your switch operating system:

?Cisco IOS software

Router# session slot number processor 1

?Catalyst operating system software

Console> (enable) session module_number

sincerely

Patrick

140
Views
0
Helpful
2
Replies
CreatePlease to create content