FWSM

[aksher]

how to nter in to MSFC, SUP, FW on 6513.

[sachinraja]

Hello aksher

from the 6500 chassis, you can use the session command to enter to the appropriate chassis...

session 4, where 4 is the module number... you need to have the correct modules on the correct slots !!!!

Hope this helps..all the best..

Raj

[Patrick Iseli]

Refernce:

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/mod_icn/fwsm/fwsm_2_3/fwsm_cfg/sysmgmt.htm

Session into the FWSM using the command appropriate for your switch operating system:

?Cisco IOS software

Router# session slot number processor 1

?Catalyst operating system software

Console> (enable) session module_number

sincerely

Patrick