Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Generate a Sha1 CSR on a ASA5520 8.2.1

I am tring to get an SSL certificate on my ASA to use with AnyConnect when I generate the "cerificate signing reequest", the asa hashes it with MD5 not SHA1 and the provider I am purchasing my public SSL certificate from will only allow SHA1 CSR's

The code on my asa is fairly old now version 8.2.1, is there anyway  I can generate the csr in sha1 format without upgrading the ios on my asa?

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Green

Generate a Sha1 CSR on a ASA5520 8.2.1

This is a limitation (or weakness) in earlier versions of the ASA and although it is not a bug, a bug report has been created to fix this issue.  You need to upgrade to 8.2(2) or higher to solve your issue.  Here is a link to the bug report:

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsw88068

--

Please rate all helpful posts and remember to select a correct answer

-- Please remember to rate and select a correct answer
1 REPLY
VIP Green

Generate a Sha1 CSR on a ASA5520 8.2.1

This is a limitation (or weakness) in earlier versions of the ASA and although it is not a bug, a bug report has been created to fix this issue.  You need to upgrade to 8.2(2) or higher to solve your issue.  Here is a link to the bug report:

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsw88068

--

Please rate all helpful posts and remember to select a correct answer

-- Please remember to rate and select a correct answer
326
Views
0
Helpful
1
Replies