cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1068
Views
0
Helpful
1
Replies

getting "%ASA-3-210007: LU allocate xlate failed " message ASA5520 8.4.6

Getting the above error continually on the failover standby ASA, looking up this error their is no indication how to fix the problem.

reload the standby ASA made no difference as soon is it came back up the messages started again,

would going to 8.4.7 fix this?

 

1 Reply 1

nkarthikeyan
Level 7
Level 7

Hi,

 

This might be due to memory issue. Have you checked the memory availability in ASA?

 

210007

Error Message %ASA-3-210007: LU allocate xlate failed for type [ static | dynamic ]-[ NAT | PAT ] secondary(optional) protocol translation from ingress interface name : Real IP Address / real port ( Mapped IP Address / Mapped Port ) to egress interface name : Real IP Address / Real Port ( Mapped IP Address / Mapped Port )

Explanation Stateful Failover failed to allocate a translation slot record.

Recommended Action Check the available memory by using the show memory command to make sure that the ASA has free memory available. If no memory is available, add more memory.

 

And also related bug in 8.4.6 version of OS CSCub08224

You can try upgrading your ASA.... to 9.1 version or something.

 

Regards

Karthik

Review Cisco Networking products for a $25 gift card