Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Global Nat on Cisco ASA

HJi,

<br />I've a Cisco ASA with software 8.0(3).

<br />I've PC behind ASA (say for example 254 hosts on interface inside); I want to do global nat on interface outside with two adddresses (say for example 100.100.100.100 and 100.100.100.101).

<br />The instructions that I have used are:

<br />nat (inside) 1 10.0.0.0 255.255.255.0

<br />global (outside)1 100.100.100.100-100.100.100.101

<br />

<br />I want that the first PC is global natted (patted) with 100.100.100.100, the second with 100.100.100.101, the third with 100.100.100.100...but the instructions above are not working...in other words i want that the ip of inside interface are alternately natted with the two addresses, and that all host simultaneously are natted on outside interface.

<br />Has anybody an idea?

<br />

<br />Thank you.

<br />Best regards,

<br />Massimiliano.

<br />

2 REPLIES
New Member

Re: Global Nat on Cisco ASA

Hi,

If you want to enable internet only for 2 ip address u can use the following commands

natnat (inside) 1 100.100.100.100 255.255.255.255

nat (inside) 1 100.100.100.101 255.255.255.255

global (outside) 1 interface

global (outside) 1 XX.XXX.XXX.XX ( Ip address)

subsequently you can keep adding the host those who wants to access internet.

Regards

Rama

Re: Global Nat on Cisco ASA

461
Views
0
Helpful
2
Replies