I'll start this discussion off more generally, with my requirements, and if any supplimental information about my config is necessary, please let me know.
I would like to have 2 SSID's being broadcase on my access point. Eg: wood-corporate, and wood-guest. Obviously wood-corporate will appear in the lan as if I was directly connected, and wood-guest will have full access to the internet only, and no access (unless permitted) to the internal lan.
My access point is a business class Dlink AP. It can broadcast multiple SSID's and I think it can do VLAN tagging.
I'm not familiar with this kind of configuration, and I've never really used VLAN tagging before.
My ASA is a Cisco 5505, and yes I have the security Plus license on it, if that is needed.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...