I created a hairpin NAT statement on an ASA so that users can access an internal website using it's external IP address. I'm able to ping the site from the workstations without a problem, but I'm unable to pull up the site. It works fine externally. Anyone run into a similar issue? Running 8.2(5).
So you probably have all the above things in a similiar form already on the ASA.
What you need to add is this
global (inside) 1 interface
This (together with the earlier "nat" command) will translated the users source address while connecting the server with the public IP address. Because we translate the users to ASAs "inside" interface IP address this means that ASA will see all the packets related to the connection and the connection should work.
Hope this helps
Please do remember to mark a reply as the correct answer if it answered your question.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...