So I have a Websserver that is being monitored from the inside of my network for the availability of port 80. The server is in my DMZ. Couple times I have made changes to an ACL or something in the ASA and caused access from the Outside to the DMZ to then fail. I need a way to test to the External IP of the Webserver. I was thinking of hairpinning but not sure how I should go about that. Any suggestions?
I guess my alternative is to have an external node setu somewhere to monitor the Public IP-$$$$ ,we poor!
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...