Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Having difficulty forwarding a range of ports using ASDN 6.4 on ASA 8.4

ASA 8.4(4)1

ASDM 6.4(9)

Cisco Novice - No familiarity with the CLI at all.

I'm trying to open up some sports for a VOIP service.

5060-5070 In/Out UDP SIP Inbound/Outbound

16384-32768 In/Out UDP RTP Media Ports

Internal IP: 192.168.1.200

I tried following this tutorial: http://www.gregledet.net/?p=537

However I get the following result:

[OK] object network RTPMediaPortsB

      object network RTPMediaPortsB

[ERROR] nat (inside,outside) static interface service udp 16384-32768 16384-32768

nat (inside,outside) static interface service udp 16384-32768 16384-32768

                                                      ^

ERROR: % Invalid input detected at '^' marker.

[OK] object network SIPInboundOutboundB

      object network SIPInboundOutboundB

[ERROR] nat (inside,outside) static interface service udp 5060-5070 5060-5070

nat (inside,outside) static interface service udp 5060-5070 5060-5070

                                                      ^

ERROR: % Invalid input detected at '^' marker.

[OK] no access-list outside_access_in line 48 extended permit object-group VOIP any 38.104.182.0 255.255.255.0

[OK] no access-list outside_access_in line 45 extended permit object-group VOIP any object CudaTel

[OK] no access-list outside_access_in line 44 remark Opened ports for VOIP service

[OK] access-list outside_access_in line 46 extended permit object-group VOIP any object CudaTel

Can anyone help me?

Everyone's tags (3)
1 REPLY

Having difficulty forwarding a range of ports using ASDN 6.4 on

Hello Tony,

Can we work on the CLI??

I will be more than glad to help if yes

Just get into the CLI and send me the following command:

Show running-config

Regards,

Julio Carvajal
Senior Network Security and Core Specialist
CCIE #42930, 2xCCNP, JNCIP-SEC
601
Views
0
Helpful
1
Replies
CreatePlease to create content