Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

Help - cannot import configuration file into csc-ssm 6.3

when I try to import a configuration which from csc-ssm version 6.2.1599 into 6.3.1172 (there are long story why I do this)

its not success and prompt me the configuration file is invalid

I tried to reimage the csc-ssm module to version 6.2.1599.0 again but Cisco website seem only have 6.3.1172.0.bin file available

there are no way to found how the old configuration look like so I cannot setup the csc-ssm module manual

and this configuration file is the only one I have

how can I change the 6.2.1599 configuration file to 6.3.1172 so that I can import to the module?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Help - cannot import configuration file into csc-ssm 6.3

If the config backup was from 6.2 you would need to be in 6.2 to import it. and then go to 6.2.1599.6 with a pkg andf then use pkgs again to go to 6.3.

To find the 6.2 images you can go here http://www.cisco.com/cgi-bin/tablebuild.pl/csc

I hope it helps.

PK

4 REPLIES
Cisco Employee

Re: Help - cannot import configuration file into csc-ssm 6.3

If the config backup was from 6.2 you would need to be in 6.2 to import it. and then go to 6.2.1599.6 with a pkg andf then use pkgs again to go to 6.3.

To find the 6.2 images you can go here http://www.cisco.com/cgi-bin/tablebuild.pl/csc

I hope it helps.

PK

New Member

Re: Help - cannot import configuration file into csc-ssm 6.3

Excuse me, I tried to click into http://www.cisco.com/cgi-bin/tablebuild.pl/csc and download the 6.2 image again today

The page below display, is it version 6.2 no longer available to be download?

NOTE:
There are currently no files for this type.



To upgrade to CSC 6.1, CSC 6.0 customers  should apply the csc6.1-b1519.pkg to their existing CSC 6.0 system.   Customers who need to reimage or prefer to install from scratch may  reimage their CSC-SSM using the csc6.1-b1519.bin image.

Please note that CSC-SSM Documentation and Release Notes can be found in the Technical Support and Documentation area.

The Japanese Language Support Patch is available at the following download page: CSC SSM Japanese Language Support Patch

New Member

Re: Help - cannot import configuration file into csc-ssm 6.3

Sorry

I loged into a wrong user.is work

Cisco Employee

Re: Help - cannot import configuration file into csc-ssm 6.3

I am glad it is fixed.

Take care,

PK

494
Views
0
Helpful
4
Replies
CreatePlease to create content