what other commands on the ASA, other than show interface, can show me some statistics about the interfaces? We have
an external SNMP app that is reporting discards on our firewall interface. Show interface reveals no
input errors, CRC, frame, overruns, etc. However, the traffic stats does report 25000 packets dropped. However, in looking at other firewalls, they all seem to have some drops. Does drops equal discards as far as what the snmp app is seeing? Are they drops due to normal reasons a firewall would drop it, or does it indicate somethings wrong? Speed duplex seems to match the switchport its plugged into. Any info is appreciated
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...