Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Help Me Create a Simple IP NAT statement(s)

All,

I'd like to create a simple IP NAT statement on my Cisco 837 router to allow any UDP 514 traffic from the outside, to enter my Dialer1 interface and hit my syslog server on the inside at private address 192.168.1.100.

Can you help me create the right IP NAT statement(s) to do so?  I've already got the firewall rules squared away.  So I just need NAT help.

Thanks!

James E

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Help Me Create a Simple IP NAT statement(s)

ip nat inside source static udp 192.168.1.100 514 interface Dialer1 514

Hope that helps.

1 REPLY
Cisco Employee

Re: Help Me Create a Simple IP NAT statement(s)

ip nat inside source static udp 192.168.1.100 514 interface Dialer1 514

Hope that helps.

165
Views
0
Helpful
1
Replies
CreatePlease to create content