Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

HELP upgrade fwsm procedure

Hi,

i need help for upgrade ASDM and Software of a FWSM.

My running software is FWSM Version 3.2(5) and i want to upgrade to last release.

ALso i want to upgrade ASDM to last release ASDM 6.2F.

Can some one explain me the exact procedure to upgrade the FWSM.

thanks a lot. 

Everyone's tags (4)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: HELP upgrade fwsm procedure

Yes, sir. That's correct.

You can store images for both ASDM and FWSM on disk if you want to, but you cannot boot them from disk.

6 REPLIES
Cisco Employee

Re: HELP upgrade fwsm procedure

New Member

Re: HELP upgrade fwsm procedure

Thanks a lot,

the section that i must read is "Installing Application Software from the FWSM CLI" , correct?

But in ASA you download the image in DISK0:,here in the flashcard?

In ASA you must use command boot to specify witch ASDM or Software you want to load on boot, here i not specify nothing?

thanks a lot best regards.

Cisco Employee

Re: HELP upgrade fwsm procedure

FWSM unlike ASA does not have the "boot system ..." CLI.

It can only boot from flash:image

Marcin

New Member

Re: HELP upgrade fwsm procedure

So i need only to download the asdm and software version to falsh and that it......

correct ?

Thanks a lot.

Cisco Employee

Re: HELP upgrade fwsm procedure

Yes, sir. That's correct.

You can store images for both ASDM and FWSM on disk if you want to, but you cannot boot them from disk.

New Member

Re: HELP upgrade fwsm procedure

Thanks a lot you are perfect.

Best regards.

5182
Views
0
Helpful
6
Replies