Looking for some assistance with creating an ACL to allow traffic both ways for a device. We have an ASA 5505 for our VPN, however there is a device on our network that needs to be monitored from the vendor. I have an open IP from the ISP that i'm going to use for a static NAT to that device, but I can't seem to get the access control list correct to allow traffic through from one specific external IP running through a pre-defined port. I also need port 80 traffic through from an external range.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...