Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Help with L2TP config.

Hello,

I have configured L2TP authenticating against a RADIUS server. The user authenticates and gets assigned an IP from the defined IP pool. The user can ping the PIX inside interface, however the user cannot communicate with inside devices. Inside devices have private IP 172.18.0.0. The PIX inside interface is 172.25.1.0 net. From the PIX I can ping all inside devices.

Here is my snap shot of my config.

IP address pool:

ip local pool atest 192.168.1.1-192.168.1.254

Access-list to permit VPN traffic

access-list vpn permit ip 172.25.1.0 255.255.255.0 192.168.1.0 255.255.255.0

access-list vpn permit ip 172.18.0.0 255.255.0.0 192.168.1.0 255.255.255.0

nat (inside) 0 access-list vpn

Am i missing something?

thanks for your help.

3 REPLIES
New Member

Re: Help with L2TP config.

Please ignore this post. I figured out what the problem was.

Thanks, and apologies for the post.

.a

Green

Re: Help with L2TP config.

sysopt connection permit-l2tp ?

New Member

Re: Help with L2TP config.

Hello,

Thanks for your reply. I actually did have the sysopt connection permit command. My issue was an internal routing issue to the IP pool configured . Got that figured out.

Thanks again for your time.

.a

126
Views
0
Helpful
3
Replies