08-22-2014 12:41 PM - edited 03-11-2019 09:40 PM
I have an ASA 5505 configured with 3 interfaces, inside, outside and DMZ. Everything seems to be working except for DMZ access to the internet. What I want is for the DMZ to communicate to the inside network over port 1433, and the DMZ to communicate to the outside through port 80 and 443 only. Packet-tracer shows that traffic is being allowed, but I am still unable to access the internet from the DMZ. My ASA license is for an unrestricted DMZ. What am I missing here? Any help would be greatly appreciated. Here is my running config:
: Saved
:
ASA Version 8.2(5)
!
hostname ciscoasa
enable password ZxfBfHJd/0y196hK encrypted
passwd WipvgyNLwa6OgUb9 encrypted
names
name xxx.xxx.xxx.xxx Outside_Public_IP
name yyy.yyy.yyy.yyy DMZ_Public_IP
name 192.168.1.5 SBS
name 192.168.1.6 Tower
name 192.168.1.102 Controller
name 172.16.1.10 DMZ_Server
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
switchport access vlan 3
!
interface Ethernet0/3
shutdown
!
interface Ethernet0/4
shutdown
!
interface Ethernet0/5
shutdown
!
interface Ethernet0/6
shutdown
!
interface Ethernet0/7
shutdown
!
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
ip address Outside_Public_IP 255.255.255.0
!
interface Vlan3
nameif DMZ
security-level 50
ip address 172.16.1.1 255.255.255.0
!
ftp mode passive
clock timezone PST -8
clock summer-time PDT recurring
dns domain-lookup inside
dns server-group DefaultDNS
name-server zzz.zzz.zzz.zzz
name-server zzz.zzz.zzz.zzz
access-list DMZ_in extended permit tcp host DMZ_Server host Tower eq 1433
access-list DMZ_in permit tcp host DMZ_Server any eq 80
access-list outside_in extended permit tcp any host Outside_Public_IP eq smtp
access-list outside_in extended permit tcp any host Outside_Public_IP eq https
access-list outside_in extended permit tcp any host Outside_Public_IP eq 3389
access-list outside_in extended permit tcp any host Outside_Public_IP eq 3391
access-list outside_in extended permit tcp any host Outside_Public_IP eq 3392
access-list outside_in extended permit tcp any host DMZ_Public_IP eq www
access-list outside_in extended permit tcp any host DMZ_Public_IP eq https
access-list outside_in extended deny ip any any log
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
mtu DMZ 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0
nat (DMZ) 1 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface smtp SBS smtp netmask 255.255.255.255
static (inside,outside) tcp interface https SBS https netmask 255.255.255.255
static (inside,outside) tcp interface 3389 SBS 3389 netmask 255.255.255.255
static (inside,outside) tcp interface 3391 Controller 3391 netmask 255.255.255.255
static (inside,outside) tcp interface 3392 Tower 3392 netmask 255.255.255.255
static (inside,DMZ) Tower Tower netmask 255.255.255.255
static (DMZ,outside) DMZ_Public_IP DMZ_Server netmask 255.255.255.255
access-group outside_in in interface outside
access-group DMZ_in in interface DMZ
route outside 0.0.0.0 0.0.0.0 xxx.xxx.xxx.xyz 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet 192.168.1.0 255.255.255.0 inside
telnet timeout 30
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect ip-options
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
!
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:077c810e608e5d0e7b455ba859c5eb7b
: end
Solved! Go to Solution.
08-25-2014 06:31 AM
Hi,
If you access http site then it will respond.... because you have allowed only http site and also you do not have the DNS allowed here for domain name resolution.... you have to allow the dns server which you configure for your host in dmz_in acl.
Regards
Karthik
08-24-2014 01:02 PM
Can you post a cli output of your packet-tracer? Also, I assume that you cannot browse to the internet but what about a ping from the dmz interface to a public IP such as 4.2.2.2?
08-25-2014 06:22 AM
do you have logging on? what is the log output you see when you try to initiate connection from DMZ to inside?
if you can asdm into ASA and see the real time logging you will see if ASA is dropping packets and for what reason.
08-25-2014 06:31 AM
Hi,
If you access http site then it will respond.... because you have allowed only http site and also you do not have the DNS allowed here for domain name resolution.... you have to allow the dns server which you configure for your host in dmz_in acl.
Regards
Karthik
08-25-2014 10:30 AM
Adding port 53 access to my dns servers on the DMZ_in acl did the trick. Thank you.
And a thanks to the others who gave suggestions as well.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide