Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

How do I forward a port?

I'm very new with cisco routers, so sorry if this is a dumb/extreamly easy question. I want to forward traffic on port 5950 to an internal ip address (10.11.100.10) on that same port. How would I go about doing that (preferably via CCP)? Thanks.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: How do I forward a port?

I would suggest following "scenario 4" under "Static Address Translation Scenarios" in http://www1.cisco.com/en/US/docs/net_mgmt/cisco_configuration_professional/v2_3/olh/ccp/ccp.pdf

It should be straightforwards.

I hope it helps.

PK

3 REPLIES
Cisco Employee

Re: How do I forward a port?

I would suggest following "scenario 4" under "Static Address Translation Scenarios" in http://www1.cisco.com/en/US/docs/net_mgmt/cisco_configuration_professional/v2_3/olh/ccp/ccp.pdf

It should be straightforwards.

I hope it helps.

PK

Cisco Employee

Re: How do I forward a port?

Take a look at this link: http://www.cisco.com/en/US/products/ps9422/products_configuration_example09186a0080b2f103.shtml#nat1

Follow the static NAT configuration. It has nice screen shots.

-KS

Community Member

Re: How do I forward a port?

That was pretty simple and straight forward. Thanks.

316
Views
5
Helpful
3
Replies
CreatePlease to create content