Port 0 is the only port that is assigned to a different Vlan, you should plug your computer to any other port other than 0 and you will be able to reach the ASA using the IP address 192.168.1.1. Make sure thou that your laptop remains using and IP on the same subnet as the ASA firewall.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...