Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

How do I upgrade PIX525(Ac+FO)6.3 to 8.0

Hello Pro,

I plan to upgrade two PIX525(Active/FO mode) 6.3 to 8.0 The current flash:16M,memory:256M.

I'd like to know the followings:

1. Do I need to upgrade flash and memory card;

2. How do I get ur license and fo license

3. May I upgrade from 6.3 to 8.0 directly, or I need to upgrade to middle version 7.x at first and then proceed to 8.0

It's an upcoming issue, would you please give me some advice on this issue?

Thank you!

2 REPLIES

Re: How do I upgrade PIX525(Ac+FO)6.3 to 8.0

Le, go over bellow links to get you started on assesment,all your questions are answered there ...

1. Do I need to upgrade flash and memory card;

No , you seem to meet requirements, 16F and 256RAM minimum is required for ur and fo.

2. How do I get ur license and fo license

Whatever active license is running under 6.x will carry over onto 7.x/8.x

3. May I upgrade from 6.3 to 8.0 directly, or I need to upgrade to middle version 7.x at first and then proceed to 8.0

my suggestion is to upgrade to a GD release in the 7.x train first.

http://www.cisco.com/en/US/docs/security/asa/asa70/pix_upgrade/upgrade/guide/pixupgrd.html

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a00804708d8.shtml

Regards

New Member

Re: How do I upgrade PIX525(Ac+FO)6.3 to 8.0

Hi,

maybe this one is usefull to you:

http://www.cisco.com/en/US/docs/security/pix/pix80/release/notes/prn803.html

Regards,

Johan

137
Views
0
Helpful
2
Replies
CreatePlease to create content