Wonder if anyone has experience of this and can give some advice/tips.
I have a Failover pair of ASA5550's running ASDM 6.2(5) and ASA 8.2(2). Originally they were setup with 2 context's and an admin context but one of the contexts has now been removed. I would like to now migrate to single mode before I go about patching them to the latest software. If anyone can suggest the best way of achieving this I would be very grateful!!!
The best way that I can think of is, since you would lose all the config when you switch from multipe mode to single, then first save the configuration of the single context that you have, change it to single and then make changes and paste it in the single mode ASA, that's the best you can do.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...