Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Cisco Support Community site will be in read only mode on Dec14, 2017 from 12:01am PST to 11:30am for standard maintenance. Sorry for the inconvenience.

New Member

How to add new subnets to VPN group

Hello,

I'm running version 8.04 on the ASA5510 and would like to add new subnets to the VPN network group. Please point me in the right direction.

Thank you so much!

3 REPLIES
New Member

Re: How to add new subnets to VPN group

Hi,

Do you mean that you have a pool of addresses being given to the VPN clients on the ASA and now you want to add more pools with different address ranges? Or maybe I'm not understanding what you're trying to do, please explain. Thank you.

New Member

Re: How to add new subnets to VPN group

I created two new vlans on the internal network (10.20.1-2.0/24). Currently, users can not access these two subnets once they logged into the VPN. I need to make these two new subnets available via the VPN.

Hope this is making sense.

Thanks again,

New Member

Re: How to add new subnets to VPN group

Hi,

To allow the VPN clients to access the internal subnets you need two things:

1. The internal subnets should be in the split tunnel ACL (if you're using Split tunneling).

2. The internal subnets should be in the nat0 statement for the VPN traffic.

Check that you have those statements correct and if the problem persists, perhaps you can share part of the config...

112
Views
0
Helpful
3
Replies
CreatePlease to create content