Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

how to adjust non_tcp_udp timeout on FWSM

Hi,

Because I want to change the "GRE" protocol timeout value , on the FWSM Command Reference 3.1,

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/mod_icn/fwsm/fwsm_3_1/fwsm_ref/t.htm#wp1259027

I find the "non_tcp_udp" syntax on the web, but I cannot adjust this value on FWSM,how can I

adjust this value?

regards

Amber

2 REPLIES
Community Member

Re: how to adjust non_tcp_udp timeout on FWSM

To set the maximum idle time duration, use the timeout command in global configuration mode timeout {xlate | conn | half-closed | udp | icmp | h225 | h323 | mgcp | mgcp-pat | sip | sip_media | non_tcp_udp | sunrpc | uauth.Refer URL

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/mod_icn/fwsm/fwsm_3_1/fwsm_ref/t.htm#wp1259027

Community Member

Re: how to adjust non_tcp_udp timeout on FWSM

Hi

I known the "timeout" command , but the "non_tcp_udp" parameter is not exist on fwsm even though you can find "non_tcp_udp" on CCO documentation.

Amber

241
Views
3
Helpful
2
Replies
CreatePlease to create content