How to check for firewall environment status via context
I am curious if we are able to check the firewall environment status from the context because as of now i do not see the command on the context and inorder for me to see the status of the environment on the cisco ASA i will have to change to the system context and this seems to be an issue having the power supply and environmental factors to be monitored. Please assist to advise if any one has the solution to it.
Using version 9.1 (4) and it has 3 context including the admin context.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...