Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to config QoS in ASA5550

Dear all,

Video & voice is not clear in telepresence device, using ASA between inside & outside. how to configure QoS for this scenario.

thanks & regards,

1 REPLY

Re: How to config QoS in ASA5550

ASA's uses QOS only in outbond direction.

It utilizes a single LLQ and matches

DSCP via class maps.

As far as configurations goes, you need to enable LLQ on an interface.Use class map to select traffic that you want to use in Queue and finally push traffic to the queue using policy map.

Following link will give you an example

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a008084de0c.shtml

HTH

Syed Iftekhar Ahmed

418
Views
0
Helpful
1
Replies
CreatePlease login to create content