How to config the ASA 5505 based on this topology?
Hey, all. So, I have this topology where I have 2 servers config with static IP, a router, a switch config with VLANs 2 and 3 and several PC and laptop. Currently PCs on VLAN 2 will get their IP from server A which is also on VLAN 2. PCs on VLAN 3 will get their IP from server B which is also on VLAN 3. The router is configured with 2 subinterfaces and these subinterfaces act as the gateway for the PCs on different VLANs. I've tested this on Packet Tracer and it works.
So my question is this, based on the topology I've attached, how would I config the ASA 5505 when it is implemented in between the router and the switch? Keep in mind that the switch is configured with VLANs. I've also attached a copy of my PKT file so that you may see my config for the switches, router and end devices.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...