Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to configure ASA 5510 V9.1(5) to send Netflow packets to Netflow Analyser 8.0

Hi guys,

I've configured my ASA 5510 Version 9.1(5) to send flow to Netflow Analyser. I think I've done it correctly but what happened is that I can see the ASA in netflow and netflow packets are receiving and increasing every time I refresh the page but there are no traffic as you can see in the attachment file. Also how can I figure out which ifindex is which interface to rename it? 

BTW, my netflow version is 8.0 and below is the netflow config:

access-list NETFLOWMONITOREDTRAFFIC extended permit ip any any

flow-export destination INSIDE A.B.C.D 9996
flow-export template timeout-rate 1
flow-export delay flow-create 60
flow-export active refresh-interval 2

class-map NETFLOW
 match access-list NETFLOWMONITOREDTRAFFIC

policy-map global_policy
 class inspection_default
  inspect dns preset_dns_map 
  inspect ftp 
  inspect h323 h225 
  inspect h323 ras 
  inspect ip-options 
  inspect netbios 
  inspect rsh 
  inspect rtsp 
  inspect skinny  
  inspect sqlnet 
  inspect sunrpc 
  inspect tftp 
  inspect sip  
  inspect xdmcp 
  inspect icmp 
  inspect icmp error 
 class NETFLOW
  flow-export event-type all destination A.B.C.D
 class class-default
  flow-export event-type all destination A.B.C.D

Hope someone can help me here.

Cheers,

Joe

Everyone's tags (3)
111
Views
0
Helpful
0
Replies
CreatePlease to create content