Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
New Member

How to configure Cisco ASA-SSM-CSC-10 module access to internet

Dear Support,

 

I want to configure CSC module access to internet. Can you provide me sample configuration for it?

 

Best Regards,

 

 

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Hi, You need to: 1. Connect

Hi,

 

You need to:

 

1. Connect the management port of the CSC to the internal network.

2. Session to the CSC: Session 1.

3. You will be prompted with basic network configuration.

4. Configure the ASA to divert the traffic to the CSC:

access-list csc deny extended deny ip host x.x.x.x any //where x.x.x.x is your CSC management IP.

access-list csc permit ip any any

!

 class-map CSC
  match access-list csc
!

policy-map global_policy
  class CSC
   csc fail-open

!

 

Then open a web browser and type https://x.x.x.x:8443 and you will get prompted with the CSC management portal where you can configure web filtering, smtp, pop3 or ftp policies.

 

 

JJ

1 REPLY
Cisco Employee

Hi, You need to: 1. Connect

Hi,

 

You need to:

 

1. Connect the management port of the CSC to the internal network.

2. Session to the CSC: Session 1.

3. You will be prompted with basic network configuration.

4. Configure the ASA to divert the traffic to the CSC:

access-list csc deny extended deny ip host x.x.x.x any //where x.x.x.x is your CSC management IP.

access-list csc permit ip any any

!

 class-map CSC
  match access-list csc
!

policy-map global_policy
  class CSC
   csc fail-open

!

 

Then open a web browser and type https://x.x.x.x:8443 and you will get prompted with the CSC management portal where you can configure web filtering, smtp, pop3 or ftp policies.

 

 

JJ

40
Views
0
Helpful
1
Replies
CreatePlease to create content