How to configure IP/SIP trunking in PIX 7.2

[jong_r0602]

Hi Gurus,

Appreciate if you can help me on how to configure ip telephony. My configuration is PBX-router-PIX-router-PBX. Any documents or sample configuration on my PIX would be great.

Thanks so much,

Jong

[JORGE RODRIGUEZ]

Jong,

This link should provide you with basic initial SIP setup inspection trough firewall.

You may need to re-post your request in Ip telephony under Unified Communications and Video section for fruther assistance.

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008081042c.shtml

Rgds

-Jorge

[jong_r0602]

Hi Jorge,

Thanks you very for your reply, ok I'll repost it as you said.

Regards,

Jong