Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Cisco Support Community site will be in read only mode on Dec14, 2017 from 12:01am PST to 11:30am for standard maintenance. Sorry for the inconvenience.

New Member

How to configure IP/SIP trunking in PIX 7.2

Hi Gurus,

Appreciate if you can help me on how to configure ip telephony. My configuration is PBX-router-PIX-router-PBX. Any documents or sample configuration on my PIX would be great.

Thanks so much,

Jong

2 REPLIES

Re: How to configure IP/SIP trunking in PIX 7.2

Jong,

This link should provide you with basic initial SIP setup inspection trough firewall.

You may need to re-post your request in Ip telephony under Unified Communications and Video section for fruther assistance.

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008081042c.shtml

Rgds

-Jorge

New Member

Re: How to configure IP/SIP trunking in PIX 7.2

Hi Jorge,

Thanks you very for your reply, ok I'll repost it as you said.

Regards,

Jong

123
Views
0
Helpful
2
Replies
CreatePlease to create content