Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Step-by-Step Configuration and Troubleshooting Best Practices for the NGFW, NGIPS and AMP Technologies A Visual Guide to the Cisco Firepower Threat Defense (FTD)
Community Member

How to configure IPSEC on PIX?

Hi All,

I have a CISCO VPN 401,need to know how i can achieve VPN connection with PIX and VPN 401..

ANy pointers?

thanks in advanced.

1 REPLY
Gold

Re: How to configure IPSEC on PIX?

For VPN client connection you need configure Easy VPN server (sometimes called remote access VPN) on PIX

Following link could be helpful

http://www.cisco.com/en/US/products/sw/secursw/ps2308/products_configuration_example09186a00801e71c0.shtml

Its for version 6.x but also contains guide for VPN client

If you are using version 7.x check following link

http://www.cisco.com/univercd/cc/td/doc/product/multisec/asa_sw/v_70/config/vpnrmote.htm

M.

hope that helps rate if it does

252
Views
0
Helpful
1
Replies
CreatePlease to create content