Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

How to configure NO NAT on ASA 5520, this is urgent!!

Hi,

I have an ASA5520 which is to be deployed in out internal network and the following subnets are configured..

outside -> 10.1.127.0 -> security level 0

inside -> 10.1.110.0 -> security level 100

We want the firewall to work more as a router only with no nat configuration at the same time the source & destination address should be able to ping each without compromising on security.

Regards,

Syed

5 REPLIES
Silver

Re: How to configure NO NAT on ASA 5520, this is urgent!!

no nat-control.

access-list outside permit ip any any log

access-group outside in interface outside

Now you have a router.

New Member

Re: How to configure NO NAT on ASA 5520, this is urgent!!

Thanks,

Is there any need to add configuration related to NAT ex..

nat (inside) 0 0.0.0 0.0.0.0.0 ???

Regards,

Syed

Silver

Re: How to configure NO NAT on ASA 5520, this is urgent!!

No. ASA, by default, will have "no nat-control"

enable.

New Member

Re: How to configure NO NAT on ASA 5520, this is urgent!!

I've done what you've suggested but still I can ping the other networks.

Regards,

Syed

Silver

Re: How to configure NO NAT on ASA 5520, this is urgent!!

post your config.

You must have other NATs on

the ASA. Once you enable PAT or STATIC NAT,

"no nat-control" becomes useless.

768
Views
0
Helpful
5
Replies